About this tool
Indian universities grade on a 10-point CGPA scale, but job applications, entrance exams and foreign universities often ask for a percentage, and there is no single formula: CBSE used 9.5 × CGPA, VTU subtracts 0.75 before multiplying by 10 for its older schemes, Mumbai University used 7.25 × CGPI + 11, and GTU and JNTUH subtract 0.5. This calculator applies the formula your board or university published and shows it with your numbers.
It also turns semester SGPAs into a CGPA, weighted by credits as the UGC choice-based credit system does, and turns a percentage back into a CGPA.
How to convert CGPA into percentage
Choose your board or university from the list; the formula appears under it. In CGPA → % mode, enter your CGPA. In SGPA → % mode, enter the SGPA of each semester and, if your grade cards show them, the credits of each semester; the calculator works out your CGPA first. In % → CGPA mode, enter a percentage to see the CGPA it corresponds to. Copy the result as text or an image, or copy a link that opens the calculator with your numbers.
Which formula to use
Use the formula of the institution that awarded the CGPA, for the scheme or regulation you were admitted under: VTU's 2022 scheme uses CGPA × 10, while its 2015, 2017 and 2018 schemes subtract 0.75 first, so the same 8.2 CGPA reads 82 % or 74.5 %. If your university is not listed and your grade card has no formula, CGPA × 10 is the usual convention on a 10-point scale, but say which formula you used when you report it.
Whoever asks for the percentage decides: CBSE says the admitting institution or employer computes it, and VTU's 2022 regulations note that there is no exact formula.
Example
A VTU student in the 2018 scheme with a CGPA of 8.20 has (8.20 − 0.75) × 10 = 74.5 %, the example in VTU's own regulations; in the 2022 scheme the same CGPA is 82 %. A Mumbai University student with a CGPI of 7.60 has 7.25 × 7.60 + 11 = 66.1, rounded up to 67 %.
With two semesters at SGPA 8.10 (20 credits) and 7.90 (22 credits), the CGPA is (20 × 8.10 + 22 × 7.90) ÷ 42 = 8.00, which is 80 % under VTU's 2022 formula.
Frequently asked questions
How do I convert CGPA into percentage?
Multiply or adjust it with your institution's formula. Common ones: CBSE 9.5 × CGPA; VTU 2015–2018 (CGPA − 0.75) × 10; VTU 2022 and Anna University CGPA × 10; GTU and JNTUH (CGPA − 0.5) × 10; Mumbai University 7.25 × CGPI + 11, rounded up. Pick your institution above to apply it.
Does the CBSE 9.5 × CGPA rule still apply?
Only to the Class 10 results that CBSE gave as grades, from 2010 to 2017; CBSE called 9.5 × CGPA an indicative equivalence, so a CGPA of 10 corresponds to 95 %. Since 2018 Class 10 results are in marks, and CBSE says it does not calculate percentages: the college or employer that needs one computes it.
How do I convert SGPA to CGPA?
Multiply each semester's SGPA by its credits, add the results and divide by the total credits. Without credits, take the simple average of the SGPAs. Then convert the CGPA to a percentage with your university's formula. The SGPA → % mode does all three steps.
What is the VTU CGPA to percentage formula?
For the 2015, 2017 and 2018 schemes VTU publishes percentage = (CGPA − 0.75) × 10, so 8.20 gives 74.5 %. For students admitted from 2022-23, the 2022 regulations use CGPA × 10, so 8.20 gives 82 %. The 2021 regulations repeat the −0.75 formula, but check your grade card.
Can I convert a percentage back to CGPA?
Yes. Choose % → CGPA and your institution: the calculator reverses the formula, for example 85 % ÷ 9.5 = 8.95 CGPA under CBSE's rule. Where the percentage was rounded up, as at Mumbai University, several CGPAs give the same whole percentage.
Official sources
- CBSE Circular No. 24/2010 — indicative percentage = 9.5 × CGPA
- CBSE notice of 30 November 2023 — calculation of percentage of Class X and XII
- VTU — standard formula to calculate percentage from CGPA (2015, 2017 and 2018 schemes)
- VTU Regulations 2022 (B.E./B.Tech.), clauses 22OB 6.6 and 6.7
- Anna University PG Regulations 2021, clause 15.5.1
- MAKAUT — how to calculate percentage from your grade point
- GTU Notification 1 of 2012 — CPI/CGPA equivalent class and percentage
- UGC guidelines for the Choice Based Credit System (SGPA and CGPA)
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
modeConvert | one of: cgpa, sgpa, reverse | default cgpa |
schemeBoard or university | one of: cbse, vtu_2015, vtu_2022, anna, mumbai_2018, mumbai_2017, makaut, gtu, jntuh, sppu, ktu, du_cbcs, du_ugcf, aktu, times10, gpa4, gpa5 | default cbse |
cgpaCGPA | number; allowed 0–10; used with mode = cgpa | required |
percentage_pctPercentage | percent: 6.5 means 6.5%; allowed 0–100; used with mode = reverse | required |
| Parameter | Value | If omitted |
|---|---|---|
semester1_sgpaSGPA | number; allowed 0–10 | required |
semester1_creditsCredits | number; allowed > 0 – 100 | optional |
Examples
?cgpa=8.2&scheme=vtu_2015?cgpa=7.6&scheme=mumbai_2018?mode=sgpa&scheme=vtu_2022&semester1_sgpa=8.1&semester1_credits=20&semester2_sgpa=7.9&semester2_credits=22?mode=reverse&percentage_pct=85
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="cgpa_percentage"]