About this tool
A fuel surcharge (FSC) passes changes in fuel prices from a carrier to the shipper without renegotiating the base freight rate. The contract fixes a base price, the fuel price already covered by the rate, and an index for the current price. When fuel costs more than the base, the shipper pays the difference for the fuel the truck burns on the load.
In the United States, most contracts use the weekly national average retail price of on-highway diesel published by the US Energy Information Administration (EIA) every Monday, sometimes a regional average. This calculator does not fetch prices: enter the index value your contract names.
How it works
Enter the current fuel price, the base (peg) price in your contract and the truck's fuel economy. With miles per gallon, the surcharge per mile is the price above the base, , divided by the MPG ; with liters per 100 km , it is the price difference times the liters used per kilometre. Multiply by the trip distance for the surcharge per trip, and add a linehaul rate to see the surcharge as a percentage of it.
The percentage-of-linehaul method follows the step tables many carriers publish: for every full step above the base price, for example 5 cents a gallon, the surcharge rises by a fixed percentage of the linehaul charge. Partial steps do not count. Switching units converts your prices, distance and fuel economy.
Example
Diesel averages 3.75 a gallon, the contract's base is 1.25 and the truck gets 6.5 MPG. The surcharge is per mile, so a 500-mile load carries in fuel surcharge.
With a step table that adds 0.5% for every 0.05 above a 1.20 base, the same price is full steps, a 25.5% surcharge, or 510 on a 2,000 linehaul. In metric units, fuel at 1.70 a liter against a 1.20 base with 32 L/100 km gives per km.
Fuel price index
The EIA publishes US retail diesel and gasoline prices every Monday, as a national average and for regions such as New England, the Gulf Coast, the Rocky Mountains and California. Most US fuel surcharge programs use the national or a regional diesel average.
Assumptions and limits
Contracts differ: some round up partial steps, some cap the surcharge, update it weekly or monthly, pay a credit when fuel falls below the base, or use a fixed MPG of 5 or 6 rather than your truck's real economy. Always follow the formula and index in your rate confirmation or tariff.
The surcharge covers fuel only, not tolls, idling or deadhead miles unless your agreement includes them. Results are estimates for quoting and checking invoices, not legal or financial advice.
Frequently asked questions
How is a fuel surcharge calculated?
The most common method subtracts the base price from the current fuel price and divides by the truck's MPG: per mile. Multiply by the miles on the load for the surcharge per trip. Another common method charges a percentage of the linehaul from a step table.
What fuel price index do shippers use?
In the US, usually the EIA's weekly U.S. No. 2 diesel retail price, published on Mondays, either the national average or a regional one such as the Gulf Coast or California. The contract states which index and which week's value applies.
What is the base or peg price?
It is the fuel price already built into the base freight rate. Many older contracts use 1.20 or 1.25 a gallon; newer ones often peg at a price close to the market when the rate was agreed. A lower base means a higher surcharge at the same fuel price.
What MPG should I use?
Use the figure in your contract. Shippers often fix it at 5 to 6.5 MPG for heavy trucks so every carrier is paid the same, while owner-operators pricing their own loads can use their real average fuel economy.
Is a fuel surcharge the same as fuel cost?
No. The surcharge only covers the increase above the base price; the fuel cost up to the base is already in the linehaul rate. To see your total fuel cost and cost per mile, use the fuel cost and cost per mile calculators.
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
units | metric or imperial | set by the first measured value |
currency | ISO 4217 code, for example USD or EUR | your saved or detected currency |
methodMethod | one of: distance, percent | default distance |
current_price_per_lcurrent_price_per_galCurrent fuel price | amount without a currency symbol; a time per unit in the name: _per_ml, _per_l, _per_m3, _per_tsp, _per_tbsp, _per_fl_oz, _per_fl_oz_uk, _per_cup, _per_pt, _per_qt, _per_gal, _per_gal_uk, _per_in3, _per_ft3, _per_yd3, _per_ul, _per_cm3; allowed 0–100 /l (metric), 0–100 /gal (imperial) | required |
base_price_per_lbase_price_per_galBase (peg) price | amount without a currency symbol; a time per unit in the name: _per_ml, _per_l, _per_m3, _per_tsp, _per_tbsp, _per_fl_oz, _per_fl_oz_uk, _per_cup, _per_pt, _per_qt, _per_gal, _per_gal_uk, _per_in3, _per_ft3, _per_yd3, _per_ul, _per_cm3; allowed > 0 – 100 /l (metric), > 0 – 100 /gal (imperial) | required |
mpgFuel economy (MPG) | number; allowed 0.5–200; used with method = distance | required |
l_per_100kmConsumption (L/100 km) | number; allowed 0.5–200; used with method = distance | required |
distance_kmdistance_miTrip distance | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed 0–1000000 km (metric), 0–1000000 mi (imperial); used with method = distance | required |
linehaul_rate_per_kmlinehaul_rate_per_miLinehaul rate | amount without a currency symbol; a time per unit in the name: _per_mm, _per_cm, _per_m, _per_km, _per_in, _per_ft, _per_yd, _per_mi, _per_nmi; allowed > 0 – 1000000000 /km (metric), > 0 – 1000000000 /mi (imperial); used with method = distance | optional |
price_step_per_lprice_step_per_galPrice step | amount without a currency symbol; a time per unit in the name: _per_ml, _per_l, _per_m3, _per_tsp, _per_tbsp, _per_fl_oz, _per_fl_oz_uk, _per_cup, _per_pt, _per_qt, _per_gal, _per_gal_uk, _per_in3, _per_ft3, _per_yd3, _per_ul, _per_cm3; allowed > 0 – 100 /l (metric), > 0 – 100 /gal (imperial); used with method = percent | required |
surcharge_per_step_pctSurcharge per step | percent: 6.5 means 6.5%; allowed > 0 – 100; used with method = percent | required |
linehaul_chargeLinehaul charge | amount without a currency symbol; allowed 0–1000000000; used with method = percent | required |
Examples
?current_price_per_gal=3.89&base_price_per_gal=1.25&mpg=6.5&distance_mi=640&linehaul_rate_per_mi=2.4?currency=EUR¤t_price_per_l=1.72&base_price_per_l=1.2&l_per_100km=31&distance_km=950?current_price_per_gal=3.95&base_price_per_gal=1.2&price_step_per_gal=0.05&surcharge_per_step_pct=0.5&linehaul_charge=2400
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="fuel-surcharge"]