Scientific Notation Calculator

Your values

Mode

Examples: 0.00042, 4.2e-4, 4.2 × 10^-4, 6.022E23

Leave blank to keep the figures you typed (1–30).

Result

Scientific notation

E notation
Engineering notation
507 × 10⁻⁶
With SI prefix
507 µ
Decimal notation
Significant figures
3

Step by step

  1. Move the decimal point 4 places to the right, so the exponent is −4.
    0.000507=5.07×10−40.000507=5.07\times10^{-4}

About this tool

Scientific notation writes very large and very small numbers compactly: the speed of light is about 2.998×1082.998\times10^{8} m/s and the mass of an electron about 9.109×10−319.109\times10^{-31} kg. This calculator converts between decimal, scientific, E and engineering notation and does arithmetic in scientific notation. It works with exact decimal digits instead of binary floating point, so 0.1 + 0.2 gives exactly 0.3 and numbers with up to 60 digits keep every digit.

How it works

In Convert mode, type a number in any common form: an ordinary decimal (0.00042), E notation (4.2e-4 or 4.2E-4) or a power of ten (4.2 × 10^-4 or 4.2*10^-4). The calculator writes it as a×10na\times10^n with 1≤∣a∣<101\le|a|<10, in E notation as used by calculators and spreadsheets, in engineering notation with an exponent that is a multiple of 3 and the matching SI prefix, and as a plain decimal. By default it keeps the significant figures you typed; enter a number of significant figures to round the coefficient.

In Calculate mode, enter two numbers and choose an operation. For multiplication and division, the coefficients are multiplied or divided and the exponents added or subtracted. For addition and subtraction, both numbers are first rewritten with the same power of ten. Every step is shown, and the answer is also rounded by the significant-figure rules taught in science classes.

x=a×10n,1≤∣a∣<10,n∈Zx=a\times10^{n},\qquad 1\le|a|<10,\quad n\in\mathbb{Z}

Example

Convert 0.000507: the decimal point moves 4 places to the right to give 5.07, so 0.000507=5.07×10−40.000507=5.07\times10^{-4}. In E notation that is 5.07E-4, and in engineering notation 507×10−6507\times10^{-6}, or 507 µ (micro).

Multiply (3.0×104)×(2.5×10−6)(3.0\times10^{4})\times(2.5\times10^{-6}): multiply the coefficients, 3.0×2.5=7.53.0\times2.5=7.5, and add the exponents, 4+(−6)=−24+(-6)=-2, which gives 7.5×10−27.5\times10^{-2}.

Add 6.5×104+3.2×1036.5\times10^{4}+3.2\times10^{3}: rewrite the second term as 0.32×1040.32\times10^{4}, then add the coefficients to get 6.82×1046.82\times10^{4}. Under the significant-figure rule for addition, the answer is rounded to the thousands place: 6.8×1046.8\times10^{4}.

Assumptions and limits

Each number can have up to 60 digits and an exponent from −9999 to 9999. Results are exact, except for division, which is shown to 30 significant figures when it does not terminate. Rounding is half away from zero, so 2.45 rounded to two figures is 2.5; some software rounds halves to even instead. Trailing zeros in a whole number such as 1500 are ambiguous, so they are not counted as significant; write 1.500 × 10^3, or 1500. with a decimal point, to make them count. Significant-figure rules are a convention for measured values and do not apply to exact counts or defined constants.

Frequently asked questions

How do you write a number in scientific notation?

Move the decimal point until exactly one non-zero digit is to its left, and count the places you moved it. Moving it left makes the exponent positive and moving it right makes it negative: 45000=4.5×10445000=4.5\times10^{4} and 0.0032=3.2×10−30.0032=3.2\times10^{-3}.

What does E mean in a number such as 3.2E-5?

E stands for “times ten to the power of”. Calculators, spreadsheets and programming languages use it because it fits on one line: 3.2E-5 means 3.2×10−53.2\times10^{-5}, or 0.000032.

What is engineering notation?

It is scientific notation with the exponent restricted to multiples of 3, so the coefficient is between 1 and 999. These exponents match the SI prefixes: 47×10−647\times10^{-6} F is 47 µF, and 2.2×1032.2\times10^{3} Ω is 2.2 kΩ.

How do you multiply and divide in scientific notation?

Multiply or divide the coefficients and add or subtract the exponents, then move the decimal point so the coefficient is between 1 and 10 again. For example, (4×105)×(5×103)=20×108=2×109(4\times10^{5})\times(5\times10^{3})=20\times10^{8}=2\times10^{9}.

How many significant figures should the answer have?

When multiplying or dividing, keep as many significant figures as the least precise input. When adding or subtracting, round to the last decimal place that both inputs have. The calculator shows the exact answer and the rounded one side by side.

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
modeModeone of: convert, calculatedefault convert
valueNumbertext in the tool's notation, see the examples; used with mode = convertrequired
significant_figuresSignificant figureswhole number; allowed 1–30; used with mode = convertoptional
aFirst numbertext in the tool's notation, see the examples; used with mode = calculaterequired
operationOperationone of: add, subtract, multiply, divide; used with mode = calculatedefault add
bSecond numbertext in the tool's notation, see the examples; used with mode = calculaterequired

Examples

  • ?value=0.0000123
  • ?value=602214076000000000000000&significant_figures=4
  • ?a=6.02e23&operation=multiply&b=2.5e-3
  • ?mode=calculate&a=1.2e-3&operation=divide&b=4e-4

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="sci_notation_calculator"]