Speed Calculator

View results · 60 mph

Inputs

Solve for

Type hours, minutes and seconds as 1:30:00, minutes and seconds as 45:00, or seconds only.

Each speed unit works with its own distance unit: km/h with kilometers and hours, mph with miles and hours, knots with nautical miles and hours, and m/s with meters and seconds.

Result

Speed (v)

In other units

  • 96.5606 km/h
  • 26.8224 m/s
  • 52.1386 kn
  • 88 ft/s
v=dtv=\frac{d}{t}

Step by step

  1. Convert the value to the working unit
    t=1:30:00=1.5 ht=1{:}30{:}00=1.5\,\text{h}
  2. Rearrange the formula for the unknown
    v=dtv=\frac{d}{t}
  3. Substitute the values
    v=901.5=60 mphv=\frac{90}{1.5}=60\,\text{mph}

About this tool

Speed, distance and time are linked by one simple relationship: speed is distance divided by time. Knowing any two gives the third, whether you are planning a road trip, checking a cycling ride, estimating a flight or working out how long a walk will take.

The result is an average speed over the whole distance. Stops, traffic and changes of pace are all included in the total time, so the average is usually lower than the speed you see most of the time.

How it works

Choose Speed, Distance or Time and enter the other two. Type the time as hours, minutes and seconds, such as 1:30:00 for an hour and a half or 45:00 for 45 minutes. Speeds can be in km/h, mph, m/s, knots or ft/s and distances in km, miles, meters, nautical miles or feet.

The calculator uses v=d/tv = d / t, d=vtd = v t and t=d/vt = d / v. It works in the distance and time units that match the speed unit, so 150 km in 1:30:00 is calculated as 150/1.5150 / 1.5 km/h, and shows the time result as h:mm:ss. It also gives the pace per kilometer and per mile for speeds up to 30 km/h (about 18.6 mph), such as walking, running and cycling; for running splits, use the pace calculator.

v=dtv=\frac{d}{t}

Example

Driving 150 km in 1 hour 30 minutes is an average speed of v=1501.5=100v = \frac{150}{1.5} = 100 km/h.

At 100 km/h, a 250 km trip takes t=250100=2.5t = \frac{250}{100} = 2.5 h, which is 2:30:00. A boat at 20 knots for 2 hours covers d=20×2=40d = 20 \times 2 = 40 nautical miles.

Assumptions and limits

The calculator gives average values and assumes the distance is measured along the route actually travelled. A straight-line distance on a map is shorter than the road distance, so speeds based on it are too low.

Times are rounded to the nearest second in h:mm:ss. For travel planning, add time for stops, and always follow speed limits and road conditions.

Frequently asked questions

How do you calculate speed?

Divide the distance by the time: v=d/tv = d / t. 120 miles in 2 hours is 60 mph.

How do I calculate travel time from distance and speed?

Divide the distance by the speed: t=d/vt = d / v. 90 km at 60 km/h takes 1.5 hours, or 1:30:00.

What is the average speed for a round trip?

It is the total distance divided by the total time, not the average of the two speeds. Going 60 km at 60 km/h and back at 40 km/h takes 1 h plus 1.5 h, so the average is 120/2.5=48120 / 2.5 = 48 km/h.

How do I convert km/h to mph?

Divide by 1.609344, because one mile is exactly 1.609344 km. 100 km/h is about 62.1 mph. To convert km/h to m/s, divide by 3.6.

What is a knot?

A knot is one nautical mile per hour, exactly 1.852 km/h or about 1.151 mph. It is used at sea and in aviation.

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
solve_forwhat to calculate: speed, distance, time; give the other 2 valuesdefault speed
speed_mphSpeed (v)number; any unit in the name: _m_per_s, _km_per_h, _mph, _ft_per_s, _kn; allowed > 0 mphgive 2 of speed_mph, distance_mi, time
distance_miDistance (d)number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 migive 2 of speed_mph, distance_mi, time
timeTime (t)duration: m:ss or h:mm:ss; allowed > 0give 2 of speed_mph, distance_mi, time

Examples

  • ?distance_km=42.195&time=2:01:09
  • ?solve_for=time&speed_km_per_h=12&distance_km=10
  • ?solve_for=distance&speed_mph=65&time=3:30:00

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="speed_calculator"]