mm to Inches Converter (with Fractions)

Your values

Convert
Decimal places

1 inch is exactly 25.4 mm. The figure in brackets after a fraction is how far that mark is from your length: minus means the mark is shorter.

Result

Inches
Nearest 1/16 inch
3/8 in (-0.48 mm)
Nearest 1/32 inch
13/32 in (+0.32 mm)
Nearest 1/64 inch
25/64 in (-0.08 mm)
Thousandths of an inch
393.7 thou
Centimeters
1 cm

Calculation

10÷25.4≈0.39410\div25.4\approx0.394

About this tool

One inch is exactly 25.4 millimeters, so to convert mm to inches you divide by 25.4, and to convert inches to mm you multiply by 25.4. A decimal answer such as 0.394 in is not something you can find on a tape measure, so this converter also rounds to the nearest 1/16, 1/32 and 1/64 inch and tells you how many millimeters each mark is off. 10 mm, for example, is closest to 25/64 in, which is 0.08 mm short; 3/8 in is 0.48 mm short. It accepts fractions such as 1 3/4 in, and the printable charts list every millimeter from 1 to 100 with all three fractions, all 64ths of an inch in millimeters, and inches from 1 to 36.

How it works

Choose mm → in or in → mm and type the length. Inches can be a decimal (0.375), a fraction (25/64) or a mixed number (1 3/4 or 1-3/4), or you can type the whole inches and pick a sixteenth from the list. The decimal result is rounded to the places you choose; the fractions are rounded to the nearest mark.

Since the international yard and pound agreement of 1959, one inch is exactly 25.4 millimeters, so the factor is exact. To find the nearest 1/64 inch, the converter multiplies the inches by 64, rounds to a whole number and reduces the fraction. It then converts that mark back to millimeters and shows the difference, so you can see whether 1/16 is close enough or you need the 1/64 mark. Thousandths of an inch (thou or mil) are for machining and sheet thickness.

in=mm25.4,mm=in×25.4\text{in}=\frac{\text{mm}}{25.4},\qquad \text{mm}=\text{in}\times25.4

Example

Convert 10 mm: 10÷25.4≈0.393710\div25.4\approx0.3937 in. In 64ths, 0.3937×64≈25.20.3937\times64\approx25.2, so the nearest mark is 25/64 in, which is 25÷64×25.4≈9.9225\div64\times25.4\approx9.92 mm, 0.08 mm short. In 16ths, 0.3937×16≈6.30.3937\times16\approx6.3, so 616=38\tfrac{6}{16}=\tfrac{3}{8} in (9.525 mm, 0.475 mm short).

Convert 1 3/4 in to millimeters: 134=1.751\tfrac{3}{4}=1.75 in, and 1.75×25.4=44.451.75\times25.4=44.45 mm exactly.

mm to inches chart

Millimeters to inches and fractions, 1 to 100 mm

MillimetersInches1/161/321/64
10.0391/16 in1/32 in3/64 in
20.0791/16 in3/32 in5/64 in
30.1181/8 in1/8 in1/8 in
40.1573/16 in5/32 in5/32 in
50.1973/16 in3/16 in13/64 in
60.2361/4 in1/4 in15/64 in
70.2761/4 in9/32 in9/32 in
80.3155/16 in5/16 in5/16 in
90.3543/8 in11/32 in23/64 in
100.3943/8 in13/32 in25/64 in
110.4337/16 in7/16 in7/16 in
120.4721/2 in15/32 in15/32 in
130.5121/2 in1/2 in33/64 in
140.5519/16 in9/16 in35/64 in
150.5919/16 in19/32 in19/32 in
160.6305/8 in5/8 in5/8 in
170.66911/16 in21/32 in43/64 in
180.70911/16 in23/32 in45/64 in
190.7483/4 in3/4 in3/4 in
200.78713/16 in25/32 in25/32 in
210.82713/16 in13/16 in53/64 in
220.8667/8 in7/8 in55/64 in
230.9067/8 in29/32 in29/32 in
240.94515/16 in15/16 in15/16 in
250.9841 in31/32 in63/64 in
261.0241 in1 1/32 in1 1/32 in
271.0631 1/16 in1 1/16 in1 1/16 in
281.1021 1/8 in1 3/32 in1 7/64 in
291.1421 1/8 in1 5/32 in1 9/64 in
301.1811 3/16 in1 3/16 in1 3/16 in
311.2201 1/4 in1 7/32 in1 7/32 in
321.2601 1/4 in1 1/4 in1 17/64 in
331.2991 5/16 in1 5/16 in1 19/64 in
341.3391 5/16 in1 11/32 in1 11/32 in
351.3781 3/8 in1 3/8 in1 3/8 in
361.4171 7/16 in1 13/32 in1 27/64 in
371.4571 7/16 in1 15/32 in1 29/64 in
381.4961 1/2 in1 1/2 in1 1/2 in
391.5351 9/16 in1 17/32 in1 17/32 in
401.5751 9/16 in1 9/16 in1 37/64 in
411.6141 5/8 in1 5/8 in1 39/64 in
421.6541 5/8 in1 21/32 in1 21/32 in
431.6931 11/16 in1 11/16 in1 11/16 in
441.7321 3/4 in1 23/32 in1 47/64 in
451.7721 3/4 in1 25/32 in1 49/64 in
461.8111 13/16 in1 13/16 in1 13/16 in
471.8501 7/8 in1 27/32 in1 27/32 in
481.8901 7/8 in1 7/8 in1 57/64 in
491.9291 15/16 in1 15/16 in1 59/64 in
501.9691 15/16 in1 31/32 in1 31/32 in
512.0082 in2 in2 1/64 in
522.0472 1/16 in2 1/16 in2 3/64 in
532.0872 1/16 in2 3/32 in2 3/32 in
542.1262 1/8 in2 1/8 in2 1/8 in
552.1652 3/16 in2 5/32 in2 11/64 in
562.2052 3/16 in2 7/32 in2 13/64 in
572.2442 1/4 in2 1/4 in2 1/4 in
582.2832 5/16 in2 9/32 in2 9/32 in
592.3232 5/16 in2 5/16 in2 21/64 in
602.3622 3/8 in2 3/8 in2 23/64 in
612.4022 3/8 in2 13/32 in2 13/32 in
622.4412 7/16 in2 7/16 in2 7/16 in
632.4802 1/2 in2 15/32 in2 31/64 in
642.5202 1/2 in2 17/32 in2 33/64 in
652.5592 9/16 in2 9/16 in2 9/16 in
662.5982 5/8 in2 19/32 in2 19/32 in
672.6382 5/8 in2 5/8 in2 41/64 in
682.6772 11/16 in2 11/16 in2 43/64 in
692.7172 11/16 in2 23/32 in2 23/32 in
702.7562 3/4 in2 3/4 in2 3/4 in
712.7952 13/16 in2 25/32 in2 51/64 in
722.8352 13/16 in2 27/32 in2 53/64 in
732.8742 7/8 in2 7/8 in2 7/8 in
742.9132 15/16 in2 29/32 in2 29/32 in
752.9532 15/16 in2 15/16 in2 61/64 in
762.9923 in3 in2 63/64 in
773.0313 1/16 in3 1/32 in3 1/32 in
783.0713 1/16 in3 1/16 in3 5/64 in
793.1103 1/8 in3 1/8 in3 7/64 in
803.1503 1/8 in3 5/32 in3 5/32 in
813.1893 3/16 in3 3/16 in3 3/16 in
823.2283 1/4 in3 7/32 in3 15/64 in
833.2683 1/4 in3 9/32 in3 17/64 in
843.3073 5/16 in3 5/16 in3 5/16 in
853.3463 3/8 in3 11/32 in3 11/32 in
863.3863 3/8 in3 3/8 in3 25/64 in
873.4253 7/16 in3 7/16 in3 27/64 in
883.4653 7/16 in3 15/32 in3 15/32 in
893.5043 1/2 in3 1/2 in3 1/2 in
903.5433 9/16 in3 17/32 in3 35/64 in
913.5833 9/16 in3 19/32 in3 37/64 in
923.6223 5/8 in3 5/8 in3 5/8 in
933.6613 11/16 in3 21/32 in3 21/32 in
943.7013 11/16 in3 11/16 in3 45/64 in
953.7403 3/4 in3 3/4 in3 47/64 in
963.7803 3/4 in3 25/32 in3 25/32 in
973.8193 13/16 in3 13/16 in3 13/16 in
983.8583 7/8 in3 27/32 in3 55/64 in
993.8983 7/8 in3 29/32 in3 57/64 in
1003.9373 15/16 in3 15/16 in3 15/16 in

Fractions of an inch in millimeters, 1/64 to 1 in

FractionInchesMillimeters
1/64 in0.0156250.3969
1/32 in0.031250.7938
3/64 in0.0468751.1906
1/16 in0.06251.5875
5/64 in0.0781251.9844
3/32 in0.093752.3813
7/64 in0.1093752.7781
1/8 in0.1253.175
9/64 in0.1406253.5719
5/32 in0.156253.9688
11/64 in0.1718754.3656
3/16 in0.18754.7625
13/64 in0.2031255.1594
7/32 in0.218755.5563
15/64 in0.2343755.9531
1/4 in0.256.35
17/64 in0.2656256.7469
9/32 in0.281257.1438
19/64 in0.2968757.5406
5/16 in0.31257.9375
21/64 in0.3281258.3344
11/32 in0.343758.7313
23/64 in0.3593759.1281
3/8 in0.3759.525
25/64 in0.3906259.9219
13/32 in0.4062510.3188
27/64 in0.42187510.7156
7/16 in0.437511.1125
29/64 in0.45312511.5094
15/32 in0.4687511.9063
31/64 in0.48437512.3031
1/2 in0.512.7
33/64 in0.51562513.0969
17/32 in0.5312513.4938
35/64 in0.54687513.8906
9/16 in0.562514.2875
37/64 in0.57812514.6844
19/32 in0.5937515.0813
39/64 in0.60937515.4781
5/8 in0.62515.875
41/64 in0.64062516.2719
21/32 in0.6562516.6688
43/64 in0.67187517.0656
11/16 in0.687517.4625
45/64 in0.70312517.8594
23/32 in0.7187518.2563
47/64 in0.73437518.6531
3/4 in0.7519.05
49/64 in0.76562519.4469
25/32 in0.7812519.8438
51/64 in0.79687520.2406
13/16 in0.812520.6375
53/64 in0.82812521.0344
27/32 in0.8437521.4313
55/64 in0.85937521.8281
7/8 in0.87522.225
57/64 in0.89062522.6219
29/32 in0.9062523.0188
59/64 in0.92187523.4156
15/16 in0.937523.8125
61/64 in0.95312524.2094
31/32 in0.9687524.6063
63/64 in0.98437525.0031
1 in125.4

Inches to millimeters, 1 to 36 in

InchesMillimeters
125.4
250.8
376.2
4101.6
5127.0
6152.4
7177.8
8203.2
9228.6
10254.0
11279.4
12304.8
13330.2
14355.6
15381.0
16406.4
17431.8
18457.2
19482.6
20508.0
21533.4
22558.8
23584.2
24609.6
25635.0
26660.4
27685.8
28711.2
29736.6
30762.0
31787.4
32812.8
33838.2
34863.6
35889.0
36914.4

Decimal inches are rounded to three places and millimeters to one place (four in the fractions chart); fractions are rounded to the nearest mark.

Assumptions and limits

The conversion is exact; only the display is rounded. A fraction can be off by up to half its step: 0.79 mm at 1/16 in, 0.40 mm at 1/32 and 0.20 mm at 1/64. Metric and fractional drill bits, sockets and pipe threads are made to their own standards, so a near match such as 19 mm and 3/4 in (19.05 mm) may still not fit; pipe sizes in inches are nominal names, not measured diameters.

Frequently asked questions

How many inches is 1 mm?

About 0.03937 inches, because 1÷25.4≈0.039371\div25.4\approx0.03937. Even the smallest common ruler mark, 1/64 in, is about 0.4 mm, so 1 mm is closest to 3/64 in (1.19 mm).

How many mm is 1 inch?

Exactly 25.4 mm. The inch has been defined as 25.4 mm since the 1959 international yard and pound agreement, and NIST and the UK Weights and Measures Act use the same value.

What is 10 mm in inches as a fraction?

10 mm is 0.3937 in. The nearest 1/16 is 3/8 in (0.475 mm short), the nearest 1/32 is 13/32 in (0.32 mm long) and the nearest 1/64 is 25/64 in (0.08 mm short).

Is 19 mm the same as 3/4 inch?

Nearly: 3/4 in is 19.05 mm, only 0.05 mm more than 19 mm. That is close enough for a ruler, but a 19 mm socket can still be too loose or too tight on a 3/4 in nut, so use the matching tool.

What is a thou or a mil?

One thousandth of an inch, 0.0254 mm. Machinists say thou and the plastics and sheet-metal trades say mil; 1 mm is about 39.4 thou.

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
length_mmlength_ft + length_inMillimeters (mm)number; for length_in, also a fraction or mixed number: 3/8, 5 3/8 or 5-3/8; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed 0–1000000000 mmrequired
decimalsDecimal placesone of: 0, 1, 2, 3default 3

Examples

  • ?length_mm=6
  • ?length_in=25/64&decimals=2
  • ?length_in=1%203/4

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="mm_to_inches_converter"]