Online Tone Generator

440 Hz

Nearest note A4 · ±0 cents

Stopped

Press Space to play or stop.

Waveform
Output
Common test tones

Start at a low volume, especially with headphones, and turn it up slowly. Very high and very low tones can be louder than they seem, and long exposure to loud sound can damage hearing.

About this tool

A tone generator plays a pure sound at a frequency you choose, measured in hertz (Hz): the number of vibrations per second. This online tone generator runs in your browser and covers 1 Hz to 20,000 Hz, roughly the full range of human hearing and beyond at the low end. Choose a sine, square, sawtooth or triangle wave, send the sound to the left, right or both speakers, and see the nearest musical note with its offset in cents.

Use it to test speakers, headphones and subwoofers, check which high frequencies you can still hear, tune an instrument to a reference pitch, find a rattle or resonance in a room, or demonstrate sound waves in a lesson. The frequency sweep mode glides from one frequency to another over a set time, which makes it easy to hear where a speaker fades out or a room starts to buzz.

How it works

Drag the slider, type a frequency into the box or use the buttons: −1 and +1 move by one hertz, ÷2 and ×2 jump an octave down or up. The slider is logarithmic, so each part of it covers the same musical distance, just as a piano keyboard does. You can also pick a common test tone or a musical note from the list. Select Play to start; you can change the frequency, waveform, output and volume while the tone is playing, and every change glides in smoothly without a click.

The sine wave is the pure tone used for hearing and speaker tests. Square, sawtooth and triangle waves add overtones, so they sound brighter and buzzier; they are played a little quieter so that switching waveforms does not jump in loudness. To sweep, choose Frequency sweep, enter a start and end frequency and a duration, then select Start sweep. A logarithmic sweep spends equal time on every octave and sounds even to the ear; a linear sweep changes by the same number of hertz each second, so it rushes through the low notes. Press Space to play or stop whenever the cursor is not in a field.

Example

To check a pair of headphones, set the frequency to 1,000 Hz, choose Sine and a low volume, and select Play. Switch Output between Left and Right: the tone should move cleanly from ear to ear at the same loudness. Then select ×2 four times to reach 1000×24=16,0001000 \times 2^4 = 16{,}000 Hz; many adults no longer hear tones this high, which is normal.

To find the lowest note a subwoofer can play, choose Frequency sweep, enter 200 Hz as the start, 20 Hz as the end and 30 seconds, and select Start sweep. Listen for the point where the bass fades away or the cabinet starts to rattle, and read the frequency from the large display.

Assumptions and limits

The tone plays only while this page is open. What you hear depends on your speakers or headphones: small laptop and phone speakers barely reproduce anything below about 100–200 Hz, and many devices filter out the top of the range, so a silent tone does not always mean you cannot hear it. This tool is not a calibrated hearing test; if you notice hearing loss or ringing in your ears, see a doctor or audiologist. Note names use twelve-tone equal temperament with A4 = 440 Hz.

Frequently asked questions

What is the range of human hearing?

Young people with healthy hearing usually hear from about 20 Hz to 20,000 Hz. The upper limit drops with age and noise exposure: many adults stop hearing tones somewhere between 12,000 and 16,000 Hz. Below about 20 Hz, sound is felt as vibration more than heard as a pitch. Our ears are most sensitive between about 2,000 and 5,000 Hz, so tones in that range sound loudest at the same volume.

What frequency is the note A4, and why 440 Hz?

A4, the A above middle C, is 440 Hz in modern concert pitch, an international standard (ISO 16) used by most orchestras and tuners. Middle C (C4) is then about 261.63 Hz. Each note is the previous one multiplied by the twelfth root of 2, so f=440×2(n−69)/12f = 440 \times 2^{(n-69)/12}, where n is the note's MIDI number. Some orchestras tune slightly higher, to 442 or 443 Hz; you can type any of these into the frequency box.

What is the difference between sine, square, sawtooth and triangle waves?

A sine wave is a single pure frequency with no overtones; it sounds smooth and is the standard for tests. A triangle wave adds weak odd harmonics and sounds a little like a flute. A square wave has strong odd harmonics and a hollow, buzzy sound like an old video game. A sawtooth wave contains every harmonic and sounds the brightest and harshest, which is why it is a classic starting point for synthesizer sounds.

What is a frequency sweep used for?

A sweep plays every frequency between two limits in one smooth glide. It quickly reveals where a speaker or subwoofer stops producing sound, which frequencies make a room, car or shelf rattle, and where your own hearing fades out at the top. Use a logarithmic sweep for listening tests, because it gives each octave the same time, and keep the volume low before sweeping into the high frequencies.

Can a tone generator damage my speakers or hearing?

It can if the volume is too high. Loud sustained tones, especially very low ones on small speakers or very high ones through headphones, can overheat tweeters, strain woofers and harm hearing. Start quietly and raise the volume gradually, stop if you hear distortion, and avoid long sessions at high volume. The generator fades every tone in and out to avoid clicks, but it cannot protect equipment that is turned up too far.

Musical note frequencies

Frequencies in hertz of every note from C0 to B8 in twelve-tone equal temperament with A4 tuned to 440 Hz, the modern concert pitch. Each octave doubles the frequency, and each semitone multiplies it by about 1.0595.

NoteOctave 0Octave 1Octave 2Octave 3Octave 4Octave 5Octave 6Octave 7Octave 8
C16.3532.765.41130.81261.63523.251,046.52,0934,186.01
C♯17.3234.6569.3138.59277.18554.371,108.732,217.464,434.92
D18.3536.7173.42146.83293.66587.331,174.662,349.324,698.64
D♯19.4538.8977.78155.56311.13622.251,244.512,489.024,978.03
E20.641.282.41164.81329.63659.261,318.512,637.025,274.04
F21.8343.6587.31174.61349.23698.461,396.912,793.835,587.65
F♯23.1246.2592.5185369.99739.991,479.982,959.965,919.91
G24.54998196392783.991,567.983,135.966,271.93
G♯25.9651.91103.83207.65415.3830.611,661.223,322.446,644.88
A27.5551102204408801,7603,5207,040
A♯29.1458.27116.54233.08466.16932.331,864.663,729.317,458.62
B30.8761.74123.47246.94493.88987.771,975.533,951.077,902.13
Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
modeModeone of: tone, sweepdefault tone
frequency_hzFrequency in hertznumber; allowed 1–20000; used with mode = tonedefault 440
sweep_from_hzStart frequency (Hz)number; allowed 1–20000; used with mode = sweepdefault 20
sweep_to_hzEnd frequency (Hz)number; allowed 1–20000; used with mode = sweepdefault 20000
sweep_duration_sDuration (seconds)number; allowed 1–600; used with mode = sweepdefault 30
sweep_scaleSweep scaleone of: log, linear; used with mode = sweepdefault log
waveformWaveformone of: sine, square, sawtooth, triangledefault sine
channelOutputone of: left, both, rightdefault both
volume_pctVolumepercent: 6.5 means 6.5%; allowed 0–100default 30

Examples

  • ?frequency_hz=1000&waveform=square&volume_pct=20
  • ?sweep_from_hz=100&sweep_to_hz=8000&sweep_duration_s=20&sweep_scale=linear

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="tone"]