About this tool
Pedometers, phones and fitness trackers count steps, but goals and routes are usually set in miles or kilometers. Converting between them depends on how long your steps are, which varies with height, speed and terrain: most adults walk with steps of roughly 60–80 cm (24–32 inches), so a mile takes about 2,000–2,600 walking steps.
Running steps are longer than walking steps and lengthen further as you speed up, so a height-based estimate does not suit running. For runs, use the measured method on a track or a known route; it is also the most accurate option for walking.
How it works
Choose whether to turn steps into distance or distance into steps, then set your step length in one of three ways. From your height , the walking step length is estimated as 0.413 × height for women and 0.415 × height for men. You can also type a step length you know, or measure it: count your steps over a known distance, such as a running track or a marked path, and the calculator divides the distance by the steps.
The distance is the number of steps times the step length , and the steps for a distance are . The results also show how many steps make a mile and a kilometer, with a quick table for common daily step counts.
Example
A woman 170 cm tall has an estimated walking step length of cm. Ten thousand steps then cover meters, about 7.0 km or 4.36 miles, and one mile takes about 2,292 steps.
A man 5 ft 10 in (70 inches) tall has an estimated step of inches, so a mile takes steps.
Assumptions and limits
Height-based step lengths are averages for walking on level ground; yours can easily differ by 10% or more and changes with pace, slopes, footwear and fatigue. Step counters also miss or add steps. For the best results, measure your step length over at least 20 to 30 meters, or a full lap of a 400 m track, at the pace you usually walk or run.
The calculator converts distance only. It does not estimate calories, because those depend on your weight, speed and terrain.
Frequently asked questions
How many steps are in a mile?
For most adults walking, about 2,000 to 2,600 steps. The exact number is 63,360 inches divided by your step length in inches: with a 29-inch step it is about 2,185 steps. Running takes fewer steps per mile because each step is longer.
How many miles is 10,000 steps?
Roughly 4 to 5 miles (6.5 to 8 km) for most adults walking. With a 70 cm step, 10,000 steps cover 7 km, about 4.35 miles.
How do I measure my step length?
Walk a known distance at your normal pace, for example 30 meters or 100 feet, counting your steps, then divide the distance by the number of steps. Repeat a few times and use the average. A 400 m track lap works well for running.
What is the difference between step length and stride length?
Step length is the distance from one foot's heel strike to the other foot's heel strike. Strictly, a stride is two steps: from one heel strike to the next heel strike of the same foot. Many pedometers and apps call the step length "stride"; this calculator uses the step length.
How many steps are in a kilometer?
About 1,250 to 1,600 walking steps for most adults: 1,000 meters divided by your step length in meters. With a 0.7 m step, a kilometer is about 1,430 steps.
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
units | metric or imperial | set by the first measured value |
directionConvert | one of: to_distance, to_steps | default to_distance |
stepsSteps | whole number; allowed 1–100000000; used with direction = to_distance | required |
distance_kmdistance_miDistance | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 100000 km (metric), > 0 – 62137.119223733396 mi (imperial); used with direction = to_steps | required |
methodStep length from | one of: height, step, measure | default height |
sexSex | one of: female, male; used with method = height | default female |
height_cmheight_inheight_ft + height_inHeight (cm) | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed 100–250 cm (metric), 39.37007874015748–98.4251968503937 in (imperial); used with method = height | required |
step_length_cmstep_length_inStep length | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed 20–250 cm (metric), 7.874015748031497–98.4251968503937 in (imperial); used with method = step | required |
measured_distance_mmeasured_distance_ftDistance covered | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 m (metric), > 0 ft (imperial); used with method = measure | required |
measured_stepsSteps counted | whole number; allowed ≥ 1; used with method = measure | required |
Examples
?steps=8500&sex=male&height_ft=5&height_in=10?distance_km=5&step_length_cm=72?steps=12000&measured_distance_ft=100&measured_steps=41
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="steps-to-miles"]