About this tool
This calculator takes any one measurement of a circle, radius, diameter, circumference or area, and computes the other three. Students, builders and makers use it for layouts, round tables, pipes and garden beds. The radius is the distance from the center to the edge, the diameter is twice the radius, the circumference is the distance around the circle, , and the area is .
How it works
Choose which measurement you already know (radius, diameter, circumference or area) and enter it as a positive number. The calculator converts it to a radius first, then derives the rest: the diameter is double the radius, the circumference is and the area is .
Working backwards uses the inverse steps. A known circumference is divided by , and a known area is divided by before taking the square root. Keep track of units yourself: if you enter an area in square centimeters, the radius, diameter and circumference come back in centimeters.
Example
Enter a radius of 2. The diameter is . The circumference is , about 12.5663706144. The area is , also about 12.5663706144, but in square units. At a radius of exactly 2 the circumference and area happen to share the same number; at any other radius they differ.
Assumptions and limits
The input must be a single positive value. The calculator has no unit selector: linear results are in whatever length unit you entered, and area is in that unit squared. Results use a high-precision value of pi and are not rounded for you. It handles full circles only, not arcs, sectors or ellipses.
Frequently asked questions
How do I find the radius from the circumference?
Divide the circumference by . For example, a circumference of 31.4 gives a radius of about 5. More precisely, the radius is about 4.9975. In the calculator, choose circumference as the known value and read the radius from the results.
How do I find the diameter from the area?
Divide the area by , take the square root to get the radius, then double it: . An area of 113.1 square inches gives a radius of about 6 inches and a diameter of about 12 inches. This is a quick way to compare round pans or tables by surface.
What is pi?
Pi is the ratio of any circle's circumference to its diameter. It is an irrational number, approximately 3.14159. Its decimal digits never end or repeat. The calculator uses the full double-precision value, which is why its results can differ slightly from a hand calculation with 3.14.
Why are circumference and area in different units?
Circumference is a length, so it uses the same unit as the radius. Area measures a surface, so it uses that unit squared, such as square meters or square inches. Doubling the radius doubles the circumference but multiplies the area by four.
How much bigger is a 12-inch pizza than a 10-inch pizza?
Pizza sizes are diameters, so the radii are 6 and 5 inches. The areas are about 113.1 and 78.5 square inches, which makes the 12-inch pizza roughly 44% larger even though its diameter is only 20% greater. Enter each diameter separately to compare the areas.
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
radiusRadius | number; allowed > 0 | required |
diameterDiameter | number; allowed > 0 | required |
circumferenceCircumference | number; allowed > 0 | required |
areaArea | number; allowed > 0 | required |
Examples
?radius=7.5?circumference=31.4159?area=50
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="circle_calculator"]