Mulch Calculator

View results · 1.17 yd³

Your project

Units

Areas

Area 1

Area: 120 ft²

Typical depth: 2–4 in. When topping up old mulch, enter only the depth to add.

Bag size

Result

Cubic yards (incl. 5% extra)
yd³
Bags of 2 ft³
16
Bags of 3 ft³
11
Total area
120 ft²
Volume without extra
1.11 yd³
V=A d12=120×312≈30 ft3=3027≈1.11 yd3V=\frac{A\,d}{12}=\frac{120\times3}{12}\approx30\,\text{ft}^3=\frac{30}{27}\approx1.11\,\text{yd}^3
V′=V(1+w100)≈1.167 yd3V'=V\left(1+\frac{w}{100}\right)\approx1.167\,\text{yd}^3

Bag counts are rounded up to whole bags. Compare the bagged cost with bulk delivery, including any delivery fee.

About this tool

Mulch keeps soil moist, evens out its temperature and holds back weeds, but only at the right depth. Extension services generally recommend 2–4 in (5–10 cm) of organic mulch: a thinner layer lets weeds through, while a much thicker one can starve roots of air and keep the soil too wet.

One cubic yard of mulch covers about 108 ft² at 3 in deep and fills 13.5 bags of 2 cu ft. Bulk mulch is usually cheaper once a project needs more than a couple of cubic yards, while bags are easier to carry and store for small beds and top-ups.

How it works

Measure each bed as a rectangle, circle or triangle and enter how deep you want the mulch, usually 2–4 in (5–10 cm). The calculator adds the beds together, multiplies the area by the depth and converts the volume into cubic yards (or cubic metres) and bags.

Bagged mulch is usually sold in 2 or 3 cu ft bags in the US and in 50 or 70 L bags elsewhere; choose the size you plan to buy. Enter a bulk price per cubic yard, a price per bag or both to see which is cheaper for your project. An extra 5–10% covers settling and uneven beds.

V=A⋅d324,N=⌈27 Vs⌉V = \frac{A \cdot d}{324},\quad N = \left\lceil \frac{27\,V}{s} \right\rceil

Example

Two beds, one 20 ft × 4 ft and one circle 6 ft across, have a total area of 80+π×62÷4≈108.380 + \pi \times 6^2 \div 4 \approx 108.3 ft². At 3 in deep, the volume is 108.3×3÷12≈27.1108.3 \times 3 \div 12 \approx 27.1 ft³, almost exactly 1 yd³.

With 5% extra, you need about 1.05 yd³: 15 bags of 2 cu ft or 10 bags of 3 cu ft. At $4.50 per 2 cu ft bag, the bags cost $67.50. Bulk mulch at $35 per cubic yard costs about $37, but once a delivery fee is added, bags can still be the cheaper choice for a single yard.

Mulch coverage tables

Coverage per cubic yard and per bag

Depth (in)Per cubic yard (ft²)Per 2 ft³ bag (ft²)Per 3 ft³ bag (ft²)
13242436
21621218
3108812
48169

Coverage per cubic metre and per bag

Depth (cm)Per cubic metre (m²)Per 50 L bag (m²)Per 70 L bag (m²)
2.54022.8
52011.4
7.513.30.670.93
10100.50.7

Bags per cubic yard and per cubic metre

Bag sizeBags per yd³Bags per m³
2 ft³13.517.7
3 ft³911.8
50 L15.320
70 L10.914.3

Coverage is the volume divided by the depth, without any allowance for settling.

Assumptions and limits

Mulch shrinks as it settles and breaks down, so beds usually need a top-up every year or two rather than a full new layer. If old mulch remains, enter only the depth you want to add. Bag sizes are nominal: bagged mulch may be packed loose or slightly compressed, and bulk mulch is measured loose.

Keep mulch a few inches away from tree trunks and plant stems, and avoid piling it into volcano shapes around trees, which can lead to rot and pests. The calculator estimates quantities only and assumes an even depth across each bed.

Frequently asked questions

How many bags of mulch are in a cubic yard?

A cubic yard is 27 ft³, so it equals 13.5 bags of 2 cu ft or 9 bags of 3 cu ft. In metric units, a cubic metre fills 20 bags of 50 L or about 14.3 bags of 70 L.

How deep should mulch be?

Usually 2–4 in (5–10 cm). Use the lower end for fine materials and the upper end for coarse wood chips, which let more air through. When topping up an existing layer, 1–2 in is often enough.

How much area does a cubic yard of mulch cover?

About 162 ft² at 2 in, 108 ft² at 3 in and 81 ft² at 4 in. A 2 cu ft bag covers 12 ft² at 2 in or 8 ft² at 3 in.

Is bulk mulch cheaper than bags?

Per cubic yard, usually yes, but delivery fees and minimum orders change the picture for small jobs. Enter both prices to compare them for your area. Bags are also easier to store and avoid a large pile on the driveway.

Can I use this calculator for compost, bark or rubber mulch?

Yes. Volume and bag counts depend only on the area and depth, so they apply to any loose material sold by volume, including compost, bark and rubber mulch. For stone sold by weight, use the Gravel Calculator.

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
unitsmetric or imperialset by the first measured value
currencyISO 4217 code, for example USD or EURyour saved or detected currency
depth_cmdepth_inDepthnumber; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 300 cm (metric), > 0 – 118.11 in (imperial)required
waste_pctExtra allowancepercent: 6.5 means 6.5%; allowed 0–100default 5
bag_size_ft3Bag sizeone of: 2, 3default 2
bag_size_lBag sizeone of: 50, 70optional
bag_pricePrice per bagamount without a currency symbol; allowed 0–10000000optional
price_per_m3price_per_yd3Price per cubic yardamount without a currency symbol; a time per unit in the name: _per_ml, _per_l, _per_m3, _per_tsp, _per_tbsp, _per_fl_oz, _per_fl_oz_uk, _per_cup, _per_pt, _per_qt, _per_gal, _per_gal_uk, _per_in3, _per_ft3, _per_yd3, _per_ul, _per_cm3; allowed 0–1000000000 /m3 (metric), 0–1000000000 /yd3 (imperial)optional
Areas — rows numbered from 1, at most 8; every field of a row is needed
ParameterValueIf omitted
area1_shapeShapeone of: rectangle, circle, trianglecounted as rectangle
area1_length_ftLengthnumber; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = rectanglerequired
area1_width_ftWidthnumber; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = rectanglerequired
area1_diameter_ftDiameternumber; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = circlerequired
area1_base_ftBasenumber; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = trianglerequired
area1_height_ftHeightnumber; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = trianglerequired

Examples

  • ?area1_length_ft=40&area1_width_ft=3&depth_in=3&bag_size_ft3=3&bag_price=4.5
  • ?currency=EUR&area1_shape=circle&area1_diameter_m=4&depth_cm=7&bag_size_l=70&price_per_m3=55

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="material"]