About this tool
The area and material cost calculator finds the area of a rectangular room or surface, subtracts openings, and multiplies by a price per square unit. Homeowners and contractors use it to estimate flooring, carpet, sod, or wall coverings before buying. Area of a rectangle is length times width, and it is measured in square units, such as square meters or square feet.
How it works
Choose meters or feet as the length unit, then enter the length and width of the rectangle in that unit. If part of the surface will not be covered, such as a fireplace hearth or a fitted cabinet, enter its area in square meters or square feet in the Area to subtract field. Finally, enter the price of the material per square unit.
The calculator multiplies length by width, subtracts the openings and multiplies the net area by the unit price. Openings larger than the rectangle are rejected because the area cannot go below zero. Keep the price in the same unit as the area: a price per square foot paired with lengths in meters gives a wrong total.
Example
With the defaults, length is 5 m and width is 4 m, so the area is square meters. No area is subtracted for openings. At a cost of 10 per square meter, the material cost is . If a 2 square meter section were excluded, the net area would be 18 square meters and the cost 180.
Assumptions and limits
The tool handles one rectangle at a time; measure L-shaped or irregular rooms as separate rectangles and add the results. It does not convert between meters and feet, and it adds no waste allowance. Openings and price must use the same squared unit as the lengths.
Frequently asked questions
How do you calculate square footage?
Measure the length and width in feet and multiply them. A room 12 feet by 10 feet is 120 square feet.
How many square feet are in a square meter?
One square meter is about 10.764 square feet, and one square foot is about 0.0929 square meters. To convert a result, multiply square meters by 10.764 or divide square feet by 10.764. A 20 m² room is therefore about 215 square feet.
How do you find the area of an L-shaped room?
Split the room into rectangles that do not overlap, calculate the area of each, and add them together. For example, an L-shaped room made of a 5 by 4 m section and a 2 by 3 m section covers m². Run this calculator once per rectangle with the same price, then add the costs.
How much extra material should I buy?
Many flooring guides suggest adding about 5% to 10% for cuts and mistakes, and more for diagonal layouts or rooms with many corners. The right amount depends on the material and the layout.
How do I add a waste allowance to the square footage?
This calculator does not add waste, so increase the area yourself before pricing. For a 10% allowance, multiply the net area by 1.10: 120 square feet becomes 132 square feet. At 3 per square foot, the material cost rises from 360 to 396.
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
units | metric or imperial | set by the first measured value |
length_mlength_ftLength | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 m (metric), > 0 ft (imperial) | required |
width_mwidth_ftWidth | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 m (metric), > 0 ft (imperial) | required |
openings_area_m2openings_area_ft2Area to subtract | number; any unit in the name: _cm2, _m2, _ha, _km2, _in2, _ft2, _yd2, _acre; allowed ≥ 0 m2 (metric), ≥ 0 ft2 (imperial) | counted as 0 |
price_per_m2price_per_ft2Cost per square unit | amount without a currency symbol; a time per unit in the name: _per_cm2, _per_m2, _per_ha, _per_km2, _per_in2, _per_ft2, _per_yd2, _per_acre; allowed ≥ 0 /m2 (metric), ≥ 0 /ft2 (imperial) | default 10 |
Examples
?length_ft=14&width_ft=12&openings_area_ft2=6&price_per_ft2=4.5?length_m=6.5&width_m=4&price_per_m2=35
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="square_footage_calculator"]